The basic design for an the Fejfar Induction Coil Battery is as follows: You take a coil of dual wire insulated wire such as ordinary two strand lamp cord and at one end of the 100 foot wire coil you connect the two end wires with a 75 ohm resistor, at the other end of the coil you take the two wire leads and attach them in parallel to the main DC Power terminals of the computer just after the AC to DC transformer. You set this up so that even when the PC Computer is Off but plugged in, the Fejfar Coil Induction Battery is still connected. In fact, you could have several of these inside the PC Computer Case. You can also parallel this with Salt Water Core Batteries. The result should be that you will have at least a 5 hour use of your computer even if the power is out. Even longer if you put the computer on standby. Also, if you put in a floating ground resistor on the return DC line, in conjunction with one way diodes, then the result is a loop recyling through the primary of circuit of the Computer of must of the electricity. The result is that, once charged, the computer may be able to run on its own for weeks at a time or more.
Perpetual (C)Copyright and (P)Patent by Anthony J. Fejfar and Neothomism, P.C. (PA)
No comments:
Post a Comment