A Water Pollution Treatment Plant

I have designed a Water Pollution Treatment Plant which is used to eliminate sanitary sewer water, such as urine and feces, from sewage water before it is pumped into a river, lake, or resevior. First, you keep the storm sewer separate from the sanitary sewer. Next, you pipe/pump the sanitary sewage into a large tank. You then have an air pipe out of the top of the tank which then pumps the methane gas from the sewage into a tank, which is then used to run a natual gas engine electrical generator which produces electricity to run the plant, and even sell the excess electricity by placing it on the grid. When the first stage tank is full, you then pump the sewage through a grinder to turn it into sewage sludge. You then pump the sludge into another tank and add a bacterial agent which dissolves the urine and feces into water, which is like RidX, which is used in septic tanks on farms in rurual ares. You then pump the relatively clean water into another tank and add a small amount of sucralose to kill the fecal cholorform. You then can all flouride and reuse the water for ordinary domestic use, including drinking water, or instead you can just pump the water into a river or lake. Please note, you cannot use regular sugar in the process, as this will cause widespread diabetes in the civilian population. If you experiment with this design, it should work.

(C)Coipyright 2010 by Anthony J. Fejfar

(C)Copyright 2010 by Anthony Fejfar

A Low Cost Smoke Stack Pollution Reducer

I have designed a low cost pollution reducer for a smoke stack. First, you narrow the smoke stack to a 2 foot diameter pipe. You place a blower fan in the 2 foot tube, blowing the smoke or pollution upwards. You then place a U turn in the pipe so that the pipe does a u turn downward. You then connect that pipe into a 3 foot by 3 foot by 8 foot box, made from aluminum. Inside the box is a foam rubber pad/filter which is kept soaked with water. The u turned pipe then faces downward into the box and forces the smoke/pollution into the water soaked foam rubber filter. Then, two feet over, at the top, you have an exist pipe for the cleaned air to exist the filter box. You then test the air coming out. If the air is clean then you are done. If not, repeat the procedure again with a new u turn pipe and filter box, above. You need to perioldically clean or change the foam rubber filter.

(C)Copyright 2010 by Anthony J. Fejfar